Permissions beyond the scope of this license may be available at http://www.cricutinspiration.blogspot.com.
Creative Commons License
Showing posts with label Tags Bags Boxes and More. Show all posts
Showing posts with label Tags Bags Boxes and More. Show all posts

Tuesday, April 6, 2010

poor Chester.....I'm at it again!

*This is a duplicate post - original post can be found at Tuesday Treats*


Hi Everyone!!!  Myamagoo here with my take on page 126 of Tags, Bags, Boxes and More.

I've never used this cut before and wasn't really sure what to do with it.  

Then one day in the mail not that long ago - I received a package from our very own SASSYLADY.

Once I opened the package and saw all the colourful feathers in there I KNEW what I was going to do with them :)

I started with designing the cake box using the blackout feature so I would only have score marks (to help guide me on where to fold).  For this project I thought I would keep the project to a 12x12 mat....however you could easily expand this and make it much larger for whatever you need.


Here is the cake box after all scoring and folding has been done.


Next I cut out patterned paper to dress up the cake box a bit.


Then I adhered those pieces to my cake box and drew lines with a white pen to mimc stitching (sadly I don't own a sewing machine).  Then used a pushpin to add some holes to try and make it look more realistic.  Not sure if I accomplished that or not :)


Next it was time to add my favourite red WACKY TACKY TAPE ~ this is the best tape to put boxes together with (in my opinion) as I don't own an ATG gun.


Once the tape was peeled off and I put the box together it was time to do something with the top of the box.  I know that normally people tend to make this cut look just like a piece of cake, but I really wanted to use those feathers that Chester donated (Sassylady I'm calling the SPCA on you - he needs those feathers - look at the vest he has to wear now!).

I digress, I wanted to make a nest and decided to make my own.  I used a branch from the cartridge that started it all (Straight from the Nest) and welded it together to make my nest.



This branch comes with leaves to fit by using the shift feature and voila! Perfect leaves for the branches.  I cut everything out all at one time - so convenient ~ JUST make sure you place your mat in the right DIRECTION....don't ask....lets just say I used more paper than I needed to because I wasn't paying attention lol!

Next I wanted to run the leaves through my cuttlebug - and you got it - I used Swiss Dots again  :) :)


After gluing all the leaves onto the branches, I started adding pop dots to my branches to add some height to the nest that is going to sit on top.

Once I had layered all 4 welded branches onto the top of the box, I got out poor Chester's feathers and slid them in underneath and in between openings in the branches.  Don't they make a lovely home for those Cadbury mini eggs??  (those eggs didn't last long after the photo shoot! yummy!_


Just a couple more pics of Chester's feathers ~ isn't he and SASSYLADY so kind? :) :) :)




Thanks for joining us today at Tuesday Treats (and Thursday too!).  Be sure to come back THIS THURSDAY to be dazzled by our favorite layout design genius SASSYLADY!!!

Gypsy File will be available on my BLOG for downloading - it is a 3 page file and uses Gypsy wanderings for the pieces on the sides of the box, as well as branches from Straight from the Nest.

Gypsy file available for download HERE
I am a MAC user and unable to provide a DS version.

Tuesday, March 2, 2010

Ruffles......and a very late shout out to Cher B!!!

First of all I would like to say what an AMAZING job CHER did on her Tuesday Treats project!! I was totally blown away and I feel so awful that I didn't get a chance to comment on her adorable bags!! CHER they are the BEST!!! do you hear me?? the BEST!!!! :):)

Second of all.....I left this project to the absolute LAST minute...and I mean LAST....as I type this blog post it is 11:55pm on a Monday evening and I should be in bed :) That being said I still wanted to try and get this out somewhat on time.....sorry for the delay!!!! This working for a living thing....geez......


My mission....should I choose to accept it is to create a purse from page 116 from Tags Bags Boxes and More.  I'm so glad I did!!  I DID NOT know this purse had the cutest little strap on it to do it up :)  how sweet is that!?

Here's what I came up with folks :)





Oh don't you just LOVE ruffles????  Here is how I did it:







Now to put this cute little purse together.....

Start by laying out all your paper on your cutting mat - for those of you that are new:  Remember to count how many squares your image takes up on your Gypsy screen as this corresponds to the squares on your cutting mat.  You will get correct paper placement every time if you follow that tip :)




Next you will cut it either page 1 or page 2 - you can only cut 1 page at a time with this file.

Then go ahead and cut the second page once you get your paper on :)

Once you have everything cut out you can either start with scoring your purse, or you can assemble your little butterfly shaker.  I decided to start scoring my purse.

When scoring....take your time to do this as accurately as you can.  A well scored purse will result in a purse or box that assembles nicely, all edges line up properly and there aren't any smushed pieces of paper anywhere :)

And here she is all ready for assembly....

As you can see from the picture all the lines have been scored and the purse is starting to take shape.  So BEFORE I glue the purse together I decided to start 'threading' my ribbon through my slots.  I just went back out one side and brought the ribbon back in through the SAME slot to get a ruffle on the outside.  Then I just moved up to the next slot with my ribbon from the INSIDE of the purse.  Just work your way up and take the time to try and keep your ruffles even....this part takes patience :)

But if you do it right ~ you end up with this :     :) :)
also if you look closely you can see that I just brought my ribbon right around to the other side on the bottom.  It looks very pretty and you don't have to glue anything down.

Once you have your ribbon threaded, just get out your trusty WACKY TACKY TAPE and glue down those folds on the inside of your purse.  Now I haven't found anything better than this stuff to hold purses together....so if you have something that you absolutely SWEAR by - please let me know :)


Once your purse is together you can move on to making your butterfly shaker and the front of the purse.

Remember that piece of purse that we pushed off the mat just to get the front piece?  Go and grab that and get your exacto knife out too :)  Using your ruler (cause I know my hand is NOT steady at all) and trim off all the excess pieces of the purse.  That would be the tabs and the little pieces right at the bottom.


Just set the patterned paper aside for a little bit and grab your 3 butterfly cutouts and your clear transparency sheet (yay I still remembered what it's called!).  Take 1 at a time and glue them on top of eachother.  Your making a butterfly sandwich :)  Once you have them all glued together stick down your transparency sheet on top (this is going to be the top of your shaker and also the side you glue your patterned paper onto.


Be sure to do a good job gluing all around the edges....you don't want any little beads getting out!!!  They are a pain!


Here is the back of the shaker piece.  As you can see I've glued it to the patterned paper and have added a clear window on the back too.  I decided this was necessary after I had designed it on my G - I will add the extra piece in the file.  I also went ahead and cut out a rectangle in white cardstock and ran it through the cuttlebug.

I thought this would look a lot nicer than just a boring orange background behind the beads.  I used my all time fav- swiss dots for the embossing.....I just might have to buy another one it is so well used! lol!

That's it!  Once you have the front all glued together and it's dry - go ahead and glue it to the front of your purse.  You can take a hole punch and punch a much smaller hole (than what the cartridge had on it) for your brad to fit through.  Just use the hole that is on the inside of the purse as a guide.  Insert your brad and TA DA!!  Finished!!!  Not as hard as it looks eh????

Now go and find your FAV gems and glitter and pearls...whatever is your go to embelly and get to work dressing up that gorgeous butterfly :)









Love this pic....it really shows how well the cuttlebugging adds to the background of the shaker.  Gotta love that BLING too ;)



oooohhhhhh RUFFLES!!!






Well, there you have it.....my take on page 116 of Tags Bags Boxes and More.....what do you think?

A hit or miss?

As soon as I get home from work tonight I will upload the gypsy file so you can all download it and take a look at the measurements.  I figured I didn't need to add it in the post :)

HAVE A GREAT DAY!!!  KEEP YOUR FINGERS CROSSED I FINISH WORK ON TIME TONIGHT! LOL!!! :) :)

Tuesday, February 2, 2010

Drumrollllll Please!!!!!



It's TUESDAY!!!!
Here is my post for our Sister Blog - TUESDAY TREATS ~ this is a duplicate post-feel free to come and visit us at our new Gypsy Blog

Welcome to our very new and very shiny blog TUESDAY TREATS!! This blog is a collaboration that Pam and I have created over the last month or two. We hope you like it here (I worked really hard on the blog header and background prettying it up), while Pam was SO VERY BUSY organizing all of you wonderful designers - fine tuning our blog, and getting us some very cool blog buttons!

Our hopes for this blog are to be able to share our knowledge with new and not so new Gypsy owners.  Inspire our readers by sharing our creations with one another.  We are starting off with tackling the Cricut Cartridge:  Tags, Bags, Boxes & More.  I was asked to try my hand at page 121.

Needless to say with the camera rolling nothing went right........ enjoy the video's they catch me at my finest hour lol!!!!










I decided for my first post I would be better able to explain my methods and thought process using video.  Tuture posts from myself will incorporate both pictures and videos, but today is special....so lots of video!

 Here is what I came up with:

Gypsy Design Part 1:


If you cannot see this video click here


Gypsy Design Part 2:


If you cannot see this video click here

PUTTING IT ALL TOGETHER:


If you cannot see this video click here

PART 2:


If you cannot see this video click here




I've decided to add the link for the gypsy file HERE :)




Creative Commons License

Wednesday, April 8, 2009

Easter Bags everywhere!!!

I forgot to mention in my last post that I have more of these to do~5 in total. Here are the pics of all my little bags :)

More Bags....





Tuesday, April 7, 2009

Easter Bags!

A friend at work asked if I would be willing to make up a few easter purses for her nieces. I was very happy to have the chance to play around with all my stuff :)
One problem!! What kind of paper was I going to use?? I have beautiful cardstock, but nothing was quite 'right'. I don't buy holiday themed cardstock either.... I like being able to use it all year round.....so being of the personality where 'no can do' is NOT an option: I made up my own darn pattern for these babies!

So tonight I broke out all my pretty things~yay!!! The butterfly stamps came out, the glitter embossing powder came out, ribbon came out, my ink came out, thank goodness that was the only stuff that came out!!! whew! As some of you know I don't have a craft room~ that's right folks! I use the kitchen table....hope no one wants to eat for awhile.....
I digress, here are the pics!!! Enjoy~ Let me know what'cha think, really! Don't be shy!


It's too bad the iridescent embossing powder didn't show up better :(