Permissions beyond the scope of this license may be available at http://www.cricutinspiration.blogspot.com.
Creative Commons License

Saturday, November 21, 2009

Cupcake Wrapper anyone??

Hi Everyone!! I had heard some rumblings on the message board for cupcake wrappers. For those of you who don't have design Studio and would just prefer to have a Gypsy file~this file is for you!

INSTRUCTIONS ARE FIRST~PICS OF WRAPPER AT END OF POST :)

oh okay, just one pic so you know what the heck I'm talking about :)


Once again I wanted to make a file that EVERYONE would be able to use no matter what cartridges you have loaded on your Gypsy. That's right~I did it again....this file uses only Gypsy Font and Wanderings :)

Okay~onto the details of this project:

This project was designed originally on a 12x24 mat~but you don't need to use one at all!

I selected this size while I was designing, as I liked having more room to move around on the mat. To be honest when I cut it I just used a 12x12 mat and didn't bother changing the mat size on the Gypsy (trust me the Expression didn't know the difference LOL!).

Also THERE ARE 2 PAGES for this file. You may also end up making a 3rd page~depending on where you want the 2 pieces placed on your mat. I used 2 pages for a very good reason~I promise!

On the FIRST page you have the outer wrapper and the base of the wrapper. If you touch one of those items you will see it's not linked to the other.

I did this specifically to allow you to BE ABLE TO MOVE THEM AROUND YOUR MAT. When you go to PAGE 2 you will understand why I did this. Here is a pic of page 1 for you. *Note: what is in red is what is on page 1. To get to page 2 just touch on the #1 on your top right hand corner. Click on any picture in this post to make it larger (easier on the eyes).



PAGE 2 shows quite a bit here~don't get worried it all makes sense in the end!

First thing right off the bat is now BOTH THE WRAPPER AND BASE are GROUPED together. This will allow you to enlarge or decrease your wrapper TOGETHER. Why did I do this? The answer is (and I found this out the hard way) if you decide after enlarging you want to move it around on the mat~but wait, they are grouped together and you just wanted the one piece. So you decide to push ungroup. Uh oh..... EVERYTHING is ungrouped....all those little pieces....a nightmare to weld!! So this is why I grouped them~easy enlarging or shrinking.

One more thing~How do I know what size I have and what should I use?

Measure the bottom of a muffin cup, the diameter across the circle should tell you what the height for your circle needs to be. In this one it is 2.16"H. After you've enlarged your wrapper and you want to see just how large it will be: Just touch 1x on your base wrapper (this will highlight to blue), then TAP ONE MORE TIME on the middle circle (turning it PURPLE) and voila! You will see the dimensions of your base diameter. I've highlighted these important details in the aqua circles.





So, if you're like me and you want to move stuff around to save paper.....

DO ALL YOUR ARRANGING ON PAGE 1. Once you have it arranged the way you want it, GROUP BOTH items. Keeping these 2 pieces highlighted in BLUE touch the + (plus) button on the top left of your screen. This will bring you to PAGE 3. Now just touch the COPY button located under the ADVANCED tab (top right hand of your screen). It is the 2 little purple squares that are beside the eye button. After you touch the copy button your image from PAGE 1 is copied to page 3 (all nicely arranged the way you want it to save paper!).

On page 3 feel free to enlarge or decrease the wrapper to your project's requirements.

When you are ready to cut just make sure you are on page 3 and you are all set!! Now, if during all of this you make a mistake~just exit out and DON'T save. Open it up and just try again :)

Any questions AT ALL please leave me a note~I read each and every single comment. Just be sure to leave me a way to contact you :)

I hope you all enjoy this one~I had a great time designing it!!









*This knocks another cartridge off my list that I was going to buy just for 1 cut LOL!*




Click HERE for the file - but please leave a thank you before you leave :)
Creative Commons License
Video, Images and Artistic Works by Myamagoo of Design~Create~Inspire is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 Unported License.
Permissions beyond the scope of this license may be available at
http://www.cricutinspiration.blogspot.com.


49 comments:

~ Lorrie ~ said...

Magoo! You just amaze me! Your Gypsy creations are just awesome and this new blog... WOWZA! LOVE IT! I need to get back to those PSE classes so I can try and learn to do a fraction of this!

Snowmanlover said...

OH Crystal, your blog looks so gorgeous! I could just stare at it all day. Thanks for sharing your cupcake file. I still have yet to figure out my Gypsy or decide whether to keep it or not!

Deb said...

Thank you so much!! I'm very new to Gypsy and you're making me love it! You're so talented, thank for sharing.

Delo said...

Magoo,
First off I love the name! Thank you for sharing your creations and your talents with the world. I love your boxes and am not creative enough to figure this out. Again, THANK YOU for sharing.
Delo on the Cricut MB

Twister said...

I love this design. Thanks for sharing your hard work.

Anonymous said...

You truly maze me with your work! When I open up your files, my mouth drops open and my eyes pop because of all of the work that is involved with the different shapes to end up with a beautiful project. Enabler, because of you and Pam, I spent a load on more paper to go with your beautiful designs! Girl, I bought the bling and the glam because you can't go plain with your designs! lol Once again, thank you!

Mercy!!

Anonymous said...

mya, please put an a in front of maze as I misspelled the word. Thanks!!

Mercy!!

Cheryl said...

Thank you for sharing all of your creative genius.

Randi said...

Thank you SOOOOOOOOOOOOOOOO! much for making this file. You knocked that same cart off my list too.

Tia Yvette said...

Oh my gosh that is the cutest! You have officially become the gypsy PRO! And the greatest thing about it is, that WE can "see" how much you enjoy creating with your gypsy! Keep up the good work... :)

Anonymous said...

wow! love that ALOT! nice job!

Anonymous said...

I love this cut file. I am very new to the Gypsy and this is the first file I have ever downloaded. I have a few questions. I am following your directions (at least I think I am) and when I move things around on page 1 then copy it to page 3 it wants to cut the base from page 2 (which isn't placed where I need it) and then it only cuts a few spots for the outside part. Can you figure out what I am doing wrong? Why when I go to page 3 and copy does all the pages still show up on top of each other? Thank you so much! Sorry for the questions!!

Kristina
kristina@thyerzoo.com

Anonymous said...

The information here is great. I will invite my friends here.

Thanks

Allison and Adam said...

That is so cool! Thanks for sharing it!

scrapBugz said...

Love the cupcake wrapper. TFS. You do great work.

Anonymous said...

Thank you!!!

Heather C said...

Thank you for sharing this :)

SweetSassyDiva said...

you make such lovely things! You are very talented!

Anonymous said...

Thank you so much. I know I will have to come back here and read the instructions several times before I can do this.

Penny

Crafting Katie said...

Thanks so much for sharing your files! I'm a Mac user too, and it's great to be able to use other people's files now (I was getting a little jealous of those DS people). I downloaded your cupcake wrapper, and it was so easy! Now my mom gets a cute fuzzy spa sock cupcake for Valentine's Day. TFS!

cricaholic said...

THANK YOU!!! cha ching... thats money I saved Thanks to you!! yup, another cart scratched off. THANK YOU THANK YOU for SHARING YOUR TALENT!!!

Anonymous said...

out of all the cupcake wrappers I have seen out there I absolutely love this --- but no gypsy just DS.

regards,

WVCathy

Mary said...

I am new to gypsy and not sure how to get the files from laptop to gypsy. But I am going to give it a try. Thank you for doing all this hard work.

Karan said...

Thank you for posting this file, Mya. You are awesome!

flipflopfrenzy said...

thank you, thank you, thank you! I am planning a cupcake party for my soon-to-be 1 year olds birthday and these will be perfect!

jessica said...

thanks so much for the cut file. i also didnt want to buy sweet treats just for the cupcake holder.

Anonymous said...

Thank you so much for sharing. I have been looking for cupcake wrappers for my daughters cupcake wedding cake.

Annette said...

Thank you so much for sharing this file :-)

scrapiegirl75 said...

So excited, finally got the file to download, now off to play!

chapapolte said...

how cute are these, thanks for sharing they are darling and will be so much fun!

Sandra1023 said...

Thanks for sharing this! It saves me from buying the new cupcake wrapper lite cart since I don't have Design Studio for all the others I have seen.

Anonymous said...

Thanks so much for sharing! I was thinking about buying the lite cart, but now don't have to!

Cindy said...

Thanks for the instructions, I cannot wait to make one.

Cindy

Lisa S said...

I've only justlearned to download files, so I'm excited for this particular file because I've been wanting a cupcake wrapper design for a while now. Thank you so much for sharing your hard work.

Shari Dancer-Thomas said...

Wow! I hope with your help, I am able to figure this out. How sweet, thanks!

jmoss50 said...

just wanted to say thank you so much for sharing your artwork! you have saved me from another purchase as well.

Jen said...

Looking forward to trying out these cuts! Thanks for sharing your hard work!!

MC said...

Thank you for sharing your file for the cupcake wrapper!! I can't wait to try it out!

Anonymous said...

Thanks so much for sharing your file and your comprehensive tutorial. Just purchased my gypsy and can't wait to try it.

Krystal Nabors said...

You just saved me from myself!! I was going to buy the cartridge just because I wanted to make cute cupcake wrappers for my son's class. YOU ARE AWESOME!!

Unknown said...

Thank you so much for sharing this! Not only did you save us all money but you made something so wonderful and cute! I would never had known where to start designing my own cupcake wrapper. You inspire me! Thank you so much!

Anonymous said...

Thanks so much! Glad I found this!
Michelle W

Unknown said...

Thank you for the great files, cany wait to look at them!

Unknown said...

Thank you so much for the wonderful blog and files! This is at the top of my list! Great job!!!

Rozette said...

Thank you so much for going this and yes saving me money bc I don't have to buy a certain cart. I ran out of time today but I will download tomorrow. :)

Anonymous said...

I have just downloaded your wrapper file and am going to give it a go. I am new to my gypsy and am a bit nervous, never seen this done before so wish me luck. BTW you're site is amazing and Thank You so much for the file...:)

hugs
Jennifer

scrapstampcrazy said...

thanks for the file. Going to attempt making porcorn cake for my kids birthday and use these wrappers.

MrsNTwyman said...

Thanks so much for sharing. I am avid cupcake baker and new gypsy and cricut owner. I can't wait to try this design.

Anonymous said...

Wow, I've been looking for the perfect cupcake wrapper, and your design is amazing. Thanks s much for sharing!